
TB pallet adhesive quality index and application instructions
AH - special adhesive for table board adhesive, water-based adhesive with excellent adhesion. It does not contain any solvent, and has superior pressure sensitivity and viscosity for plastic/cloth/paper/wood/glass and metal substrates. It is specially recommended to fix the printed matter without slipping or shifting during screen printing. It can also fix the printed matter without vacuum sucker equipment, including cloth, paper, leather, plastic, wood, acrylic, stencil, copper sheet or film.
Category:
Formwork glue

E-mail:
Product Description
Product introduction
AH - special adhesive for table board adhesive, water-based adhesive with excellent adhesion. It does not contain any solvent, and has superior pressure sensitivity and viscosity for plastic/cloth/paper/wood/glass and metal substrates. It is specially recommended to fix the printed matter without slipping or shifting during screen printing. It can also fix the printed matter without vacuum sucker equipment, including cloth, paper, leather, plastic, wood, acrylic, stencil, copper sheet or film.
The use of AH table adhesive is very simple. Just take a little of it out and put it on the printing pad, rub it into a cloth ball with rags, apply a thin layer of it evenly in a clockwise (or counterclockwise) circle, and dry it naturally at room temperature above 25 ℃ for 20 minutes. It can be used when it feels sticky when touching. It can be used immediately after drying with a hot air blower.
AH special adhesive for pallet adhesive is characterized by strong adhesive force, short adhesive wire, and it will be firmly on that side when it is rubbed, and will never back stick to the printed matter. It can be diluted with water, but once it is dry, it is insoluble in water.
If there is dust or cotton wool attached to the printing pad surface, the viscosity will be invalid. At this time, just wipe off the dust or cotton wool with wet cloth and dry it with hot air, and the viscosity will recover. Usually it can be used for one month once. AH special adhesive for table glue can be wiped off with washing powder or lamp oil.
Matters needing attention
AH special adhesive for pallet adhesive cannot be used as general printing ink.
When it is too cold or humidity is too high in winter, its viscosity will be affected.
In case of direct contact with hands or skin, please wash it with soap.
It is strictly prohibited to directly expose to the sun and avoid freezing at low temperature (not applicable when leaving the site at 5 ℃)
Packaging, transportation and storage
1. 50kg
2. Storage period: unopened, unfrozen, in a dark place, valid for 12 months. (calculated from the production date)
Please note that the description and suggestions of Bingyan AH products are based on long-term experience and practical theory, and are only for reference.
Due to differences in screen printing conditions, acceptance standards, national laws and regulations, fabrics, climate, places, processes, and personnel, various factors affect the printing effect. Therefore, each type and batch of printing materials need to be proofed and confirmed before users decide whether to mass produce.
Prev
无
Next
Leave your cooperation intention
Related Products