Products

Home page

Quality index and application description of TL series adhesive

Applicable process: roller, rotary screen, flat screen, pigment printing, pigment dyeing, spray painting, etc.

Category:

Pigment printing adhesive

E-mail:

jyuesu@126.com

Contact

Consult

Product Description

Model	Solid content	Technical indicators			Ionic type	Apparent viscosity (Pa·S)	Remarks
Model	Solid content	Dry rub	Wet rub	Brushing fastness	Ionic type	Apparent viscosity (Pa·S)	Remarks
TL108	36%±1%	≥3 level	≥2.5 level	≥3 level	Anion	/	Viscosity can be adjusted according to customer requirements
TL101T	39%±1%	≥3 level	≥2.5 level	≥3 level	/
TLA6	36%±1%	≥3 level	≥2.5 level	≥3 level	Anion
TL102R	32%±1%	≥3 level	≥2.5 level	≥3 level	Anion
TL102B	32%±1%	≥3 level	≥2.5 level	≥3 level	/
TL101	39%±1%	≥3 level	≥2.5 level	≥3 level	Anion
TL101A环	39%±1%	≥3 level	≥2.5 level	≥3 level	Anion
TL101环	39%±1%	≥3 level	≥2.5 level	≥3 level	Anion
TL101B	33%±1%	≥3 level	≥2.5 level	≥3 level	Anion
Environment represents environmental protection, and formaldehyde is well controlled

Scope of application：

1. Applicable process: roller, rotary screen, flat screen, pigment printing, pigment dyeing, spray painting, etc.

2. Applicable fabrics: cotton, polyester cotton, acrylic, polyester, knitwear, terry fabric, silk products, etc.

3. Suitable for all kinds of paint pastes.

Main advantages：

1. AH series adhesive is milky white with PH value of 6.5-7. According to the baking conditions of different manufacturers, different series of products can be used to greatly adjust the product dosage. Even when baked at high temperature (190 oC), it will not turn yellow and remain transparent.

2. There is no need to add cross-linking agent. The color paste after preparation has good stability. It can be stored in a container with a lid for 15 days without skin on the surface.

3. Printed products have soft hand feel, good fastness and bright colors.

4. It can be co printed with AH series synthetic thickener, PTF, etc., or with emulsion slurry A (the latter is not recommended, because it will pollute the environment).

Regard

1. When using AH series adhesives, do not add crosslinking agents FH and EH, otherwise flocculation will occur;

2. The thickness of adhesive can be adjusted with ammonia or urea;

3. Sizing sequence: mix 1.5-2.5% thickener with tap water (deionized water is preferred if conditions permit) for 5-10min with a high-speed beater to make atomic pulp, place it so that the atomic pulp can be fully expanded and stabilized, and then add AH series products and paint color paste to make uniform pulp for use. The printing paste has good stability.

Packaging and storage：

1. 200KG iron bucket, 50KG, 125KG, 150KG plastic bucket packaging;

2. The shelf life of indoor storage, ventilation and drying shall be from minus 2 ℃ to+40 ℃ for half a year.

Please note that the description and suggestions of Bingyan AH products are based on long-term experience and practical theory, and are only for reference.

Due to differences in printing and dyeing conditions, acceptance standards, national laws and regulations, fabrics, climate, places, processes, and personnel, various factors affect the printing effect. Therefore, each type and batch of printing materials need to be proofed and confirmed before users decide whether to mass produce.

Quality index and application description of high-temperature adhesives

无